Publicité
5
Operation
The extraction and filter system must only be used for the extraction of the substances described in these instructions.
During operation, the condition of the filters must be checked regularly.
Operating, ambient, storage and
transport conditions
Storage and transport temperature
Working temperature
Max. relative humidity
Use
Max. height above sea level
Operation
5.1
Control elements
5.2
Operation
Manual operation
1
2
The diagram shows the front panel with all of the display elements.
All manuals and user guides at all-guides.com
5 Operation
°C
-25 to +55 (max. 70 C / 24 h)
°C
5 to 40
%
80 without condensation
Damaging effects from possible condensation are prevented by special
bypass ventilation.
Only indoors, dust content of ambient air must not be too high
m
2000
-
Extraction level of the system can vary by ±10 %.
-
If the system is not constantly supplied with a run signal (Pin7+8) via the
interface, it may switch to standby mode if there is a malfunction. The
system can be switched back easily to "Run" via the front panel.
-
If you are using the RS232 interface, an EMC-tested adapter must be used
to ensure correct functioning.
5
5
4
5
65-236
8
7
6
9
3
Publicité
