Symmons Lig-Res 57-2DIV-TRM Manuel D'installation

Diverter Valve Trim 57-2DIV-TRM
Ligature Resistant
Specification Submittal
Feature Highlights
■ Dual Outlet Diverter Valve Trim with ligature
resistant knob
■ Trim is used with Symmons dual-port diverter valve
■ Vandal resistant screws
■ Metal construction
■ Polished chrome finish (standard)
Model Numbers
Dual outlet diverter valve trim
 57-2DIV-TRM
(diverter valve not included)
Finish Options / Modifications
Append appropriate -suffix to model number
Polished Chrome (standard finish)
-
Dimensions
Lig-Res Diverter Valve Trim, 57-2DIV-TRM
Notes:
(1) Dimensions identi ed with an asterisk (
diverter valve is installed without primary mixing control valve.
When diverter valve is coupled with a primary mixing control
valve, then dimension is determined by rough-in drawing
provided with mixing control valve.
(2) Dimensions subject to change without notice
Symmons Industries, Inc.
Copyright © 2022 Symmons Industries, Inc.
Lig-Res
∅ 5-5/8"
(143 mm)
3-7/8" (98 mm) max.*
2-3/4" (70 mm) min.*
) apply when
*
■
31 Brooks Drive
Location:
®
Disclaimers
Product is designed to reduce likelihood that unit
■
could be used as a device for hanging.
Product is not a substitute for the evaluation, treatment
■
or appropriate supervision of persons at risk of suicide
Warranty
Limited Lifetime - to the original end purchaser in
■
consumer installations.
5 years - for commercial installations
■
Standards / Certifications
ASME A112.18.1/CSA B125.1
nished wall
Hole size:
3-1/2" (89 mm) max.
3" (76 mm) min.
■ ■
Braintree, MA 02184 Phone: (800) 796-6667
■ ■
symmons.com gethelp@symmons.com
3-1/4"
(83 mm)
All ports both
1/2" male IPS and
1/2" female sweat
■
Fax: (800) 961-9621
■ ■
ZV-1477 REV D 111122