Publicité
Functions and Operation
Functions
Press and hold on "POWER" button for 5 seconds to activate the control panel.
Temperature setting
"FRIDGE/FREEZER", "+", and "–": the buttons to set temperature of fridge and freezer compartments.
Press "FRIDGE/FREEZER" to enter the temperature setting mode and switch between the fridge temperature and the
freezer temperature.
Press "+" or "–" to set the temperature.
Fridge temperature "+"setting cycle: 1°C – 7°C (34°F – 45°F)
Fridge temperature "–" setting cycle: 7°C – 1°C (45°F – 34°F)
Freezer temperature "+" setting cycle: -12°C – -18°C (10°F – 0°F)
Freezer temperature "–" setting cycle: -18°C – -12°C (0°F – 10°F)
Press "FRIDGE/FREEZER" for 3 seconds to switch between "C" and "F".
If there is no operation for 5 seconds, it will automatically exit the setting mode and enter the display voltage mode.
Power off
Hold on "POWER" button for 5 seconds to turn off the refrigerator for any extended period of non-use.
Battery Monitor
When the communication is normal, the digital tube displays the voltage, and the power-on displays "--".
"Normal": Normal voltage range: 10.4~14.5V
"OV ALM": Over voltage alarm: >=14.5V
"UV ALM": Under voltage alarm: <=10.4V
When the voltage is too high, "OV ALM" icon will turn on.
When the voltage is insufficient, "UV ALM" icon will turn on. Meanwhile, there will be a beeping sound for 3 seconds to
remind the user.
Deactivating the Defrosting Function
In the voltage display mode, press and hold "+" for 5 seconds to deactivate the defrosting function, and the control
screen will alternately display voltage / "HC".
After 48 hours, the normal defrosting function will be restored.
Error Codes
E2
Fridge sensor failure
E3
Freezer sensor failure
E4
Frosting sensor failure
H1
Over voltage alarm
LO
Low voltage alarm
ED
Door alarm
EC
Communication failure
CCD-0007851 Rev: 1-9-2025
- 7 -
Publicité
