Publicité
1. Control panel
2. Cover
3. Base of the unit
4. Lid release button (one on left and one
on right)
5. Sealing strip
5. Compression band (from bag to sealing
band)
6. Locking tab
7. Top seal
8. Vacuum chamber
9. Fixed axis
10. Lower seal
11. Vacuum chamber
12. Anti-scald switch
13. Air intake tube (never block the orifice)
14. Welding band
15. Cover release button
Control panel :
AUTOMATIC (AUTO)
A short press on this key allows the device to make the vacuum and to weld in a single operation.
First, the device makes the vacuum (the indicator light lights up), then in a second time the welding
function starts automatically (the indicator light lights up). You can remove the bag when the 2 indi-
cator lights go out.
CANCEL (ANNUL.)
This function allows you to stop the operation in progress at any time.
WELDING (manual mode)
When you don't need to vacuum a bag, or when you want to size a bag on demand, you can weld
the bag with this key ... during the welding process, the vacuum pump will start up in order to press
the bag on the welding band.
VACUUM (manual mode)
This key allows you to vacuum a bag manually on demand. Very practical in the case of foodstuffs
sensitive to «crushing» (dry cakes for example, to avoid breaking them if the vacuum is too high)...
you must keep your finger on this key as long as you need it, then press the sealing button.
INSTRUCTIONS FOR USE
5
8
2
1
4
3
Publicité
