Publicité
The M2UHF-RFID Midrange attachable module can become very
hot during extended operation. To protect persons and the
module, the maximum time of a scan is limited to two minutes.
CAUTION
9.5.2.3
Handling
After the M2UHF-RFID Midrange attachable module has been plugged into the main device on the upper
plug-slide mechanism, it can be used for reading UHF-RFID tags.
To do this, start a software application to initialize the module. Then the read process can be carried out with
the software application.
9.5.2.4 Technical Data M2UHF-RFID Midrange
The table below includes the technical data for the M2UHF-RFID Midrange plug-in module.
Housing
Protection class
Operating
temperature
Storage temperature
Rel. humidity
Device dimensions
Weight
Interfaces
Frequency range EU
Frequency range
USA and Canad
Read range
Antenna type
RFID protocols
Output power
10 Instructions for Cleaning and Care
Clean the Mobile Handheld Computer by setting it down on a surface (e.g. table). This way, you can hold it
securely and the Mobile Handheld Computer cannot slip out of your hands during the cleaning process.
Do not use any corrosive chemicals, cleaning solutions or strong
cleaning agents in order to clean the Mobile Handheld Computer,
battery and docking station.
CAUTION
All components must be disposed of properly at the end of their
technical lifetime.
ATTENTION
M2SmartSE_Set_Brief Overview_V0.9_en_fr
ABS/PC
IP54
-20 °C to 50 °C/-4 °F to 122 °F
Condensation of the device must be avoided.
-20 °C to 60 °C/-4 °F to 140 °F
5 % - 90 % non-condensing
52 x 85 x 27 mm (L x W x H)
58 g
Plug for connection to the main device
865.7 to 867.5 MHz
902.75 to 927.25 MHz
Up to 6 meters
Integrated Linear Polarized
EPCglobal UHF Class 1 Gen 2
ISO 18000-63 (formerly 18000-6C)
DRM (Dense Reader Mode) support
0 dBm until +27 dBm
Technical Data
28 / 63
Publicité
