Télécharger Imprimer la page

ACD GRUPPE M2Smart SE Guide Rapide page 22

Publicité

Storage
temperature
Device dimensions
Weight
Power supply
Display
Interfaces
9 M2Module
9.1 Intended Use
The modules of the Mobile Handheld Computer serve as accessories for the M2Smart
components are intended exclusively for use with the Mobile Handheld Computer.
9.2 Warning and Safety Notices
Please read the following warning and safety notices. They are for your safety and to ensure that the various
modules are ready to use.
Only ACD original power supplies may be used for operation of the
modules! The use of components that have not been approved can
cause the destruction of the modules or the main device.
CAUTION
Do not set the modules near heat sources (heater blowers, etc.)
and never subject them to direct solar radiation, excess quantities
of dust or shocks. Make sure that there is no stumbling hazard due
to connection cable or power supplies.
CAUTION
The modules may not be used in areas subject to explosion.
CAUTION
Before using the modules, any connection cables must be
checked for damage. Damaged parts must be replaced. For this,
please contact ACD Elektronik GmbH.
CAUTION
Before use, the contacts of the modules and the contacts of any
plugs present must be checked for dirt and cleaned if necessary.
CAUTION
Unintended use of the interfaces is forbidden.
CAUTION
To prevent overheating, the modules may not be covered during
operation.
CAUTION
M2SmartSE_Set_Brief Overview_V0.9_en_fr
-20 °C to 60 °C/-4 °F to 140 °F
138 x 200 x 82 mm (L x W x H)
557 g
15 VDC, 36 W
2 status LEDs
USB, Ethernet, DC plug
®
SE. The included
22 / 63

Publicité

loading

Ce manuel est également adapté pour:

Ds2smart