6.2 Docking Station
6.2.1 Power supply
®
The M2Smart
SE and the replacement rechargeable battery may only be charged in the DS2Smart
station with the appropriate power supply.
▪
External power supply for DS2Smart
•
Input voltage
•
Output voltage
▪
Power cable (country-specific)
6.2.2 Interfaces
The interfaces of the DS2Smart
Fig. 46: Interfaces of the DS2Smart
The connections are described from left to right:
▪
The USB socket type A is the USB host interface. The connected USB devices are identified by the
USB host adapter in the M2Smart
▪
The RJ45 socket is the Ethernet interface (10/100 Mbit). The network communication takes place via
the Ethernet interface on the M2Smart
▪
Insert the DC connector of the power supply in the DC socket for the supply voltage.
Unintended use of the interfaces is forbidden.
CAUTION
M2SmartSE_Set_Brief Overview_V0.9_en_fr
®
~
100 - 240 V AC; 1.0 A max.; 50 - 60 Hz
15 V DC; 2.4 A
®
docking station will be described below. These are mounted on the rear.
®
®
SE.
®
SE.
®
docking
17 / 63