Publicité
Installing ways of cement and beton wall
Put the wall mount flatly in the installing position, using it as template, lining out the hole
on the wall. Use a aiguille of dia 10.5 mm to drill three 50 mm deep holes. Insert the wall
anchor (5) into the mounting holes, and lightly tap them flush to the wall with a hammer.
Securely mount the wall plate with supplied Long bolts (4) using 5x5mm wrench (I I).
As shown in Fig. 4.
Carefully: Wall anchor is just fit for cement and beton wall. Don't use wall anchor in
drywall to install bracket.
5
4
11
50m m
10.5m m
Fig. 4
23
Publicité
