Publicité
Step 3: Mount the wall bracket
Installing ways of batten wall
Use an electonic detector in lay position to detect the position of batten, then making
a mark. Put the wall mount in the installing position flatly, using it as template, lining
out holes in the batten. Using a aiguille of dia 4.5 mm to drill three 50 mm deep holes.
Securely mount the wall plate with supplied Long bolts (4) using 5x5mm Wrench (I I).
As shown in Fig. 3.
4
11
50
4. 5
Fig. 3
22
Publicité
