Publicité
We are not responsible for any personal injury or product damage due to mishandling,
incorrect mounting, incorrect assembly or incorrect use of this product.
Note: The supplied wall mounting hardware is not for use on steel stud walls or cold
cinder block walls. If you are uncertain about the nature of your wall, please consult a
qualified contractor. If the hardware you required is not included please contact your
local hardware store.
Step 1: Install Plastic mat to shelf
Attach Plastic mat(8) to Sjelves(2) with Set bolts(7) using allen 2.5 x 2.5 mm Wrench(9).
Do not over tighten the bolts, and then Slide the plate into position as required (Fig. 1).
It can be retracted to fit all sizes of A/V equipment. Then securely tighten all bolts using
2.5 mm wrench(7).
Step 2: Install shelf
Attach two Shelves(2) to wall bracket (1) with bolts(6) using allen 3x3mm Wrench(10).
Do not over tighten the bolts.
8
2
2
1
6
10
7
9
Fig. 1
Fig. 2
21
Publicité
