Publicité
Fault Conditions
When the F or R charge status LED ashes red, a fault condition exists. There are three different ash
patterns, each indicating a speci c type of fault. The ash patterns and fault conditions are as
follows:
Flash Pattern
Flashes 1 Time
Flashes 2 Times
Flashes 3 Times
All manuals and user guides at all-guides.com
Fault Type
Indicates charging complete, but battery is under charged. Battery voltage is
below minimum level required. This warning is provided after the rapid
charging stage is complete.
Indicates battery contact is "open" and current is not passing through the
(+) and (-) contacts on the battery. This warning is provided after the initial
diagnostic stage is complete. Check charging pod to con rm compatibility
with battery.
Indicates over-current condition caused by battery short circuit. Have the
battery checked by a quali ed technician. Do not attempt charging the
battery if a short circuit exists.
9
Publicité
