Publicité
Replacing A Charging Pod
The charging pod is made from quality materials and designed to provide years of service when properly
used. In most cases, the charging pod will only be replaced when you want to use the charger with a
different battery. Each pod charges two batteries for a speci c radio; the two batteries may have
different capacities or chemistries.
Follow these steps to change the charging pod:
1
Obtain a charging pod made speci cally for the charger. Con rm that the charging pod is compatible
with the battery you want to charge.
Unplug the power supply from the charger.
2
The charging pod is secured to the base with a single screw. Turn the locking screw on the bottom of
3
the rear charging pod counter-clockwise until it no longer holds the pod. Lift the charging pod from the
charging base.
4
Insert the replacement charging pod into the charging base and secure with the locking screw. Do not
over tighten the screw.
Inspect the charging contacts to ensure they are clean and unobstructed.
5
Connect the power supply to the charger. You are now ready to charge a battery compatible with the
6
charging pod.
6
All manuals and user guides at all-guides.com
Publicité
