Publicité
Charging a Battery
1
Con rm that the charging pod and battery are compatible.
2
Insert the DC plug from the power supply into the opening on the
right side of charger, connect the AC wall plug to a 120 V outlet,
and turn the power switch (left side) to the on position. The
status LED indicators marked "P" illuminate green to con rm the
front and rear positions for each pod are receiving power.
3
Place the battery to be charged in either the front or rear position
of the charging pod. The status LED marked "F" or "R" will
illuminate to con rm which position is charging the battery. The
battery may be charged while attached to the radio and two
batteries may be charged simultaneously.
4
When a battery is placed in the charging pod and while charging,
the charge status LED (F or R) will illuminate red with no ashing.
If the charge status LED is red and ashes, a fault has been detec-
ted. The ash pattern represents a speci c fault condition.
See section Fault Conditions for details.
All manuals and user guides at all-guides.com
R
Status LED for rear position.
F
Status LED for front position.
P
Illuminates green when charger
is connected to power.
7
Publicité
