Publicité
Converting KM 406
Changing the small burner jet
g
f
1 / 16 "
(2mm)
a, c Fittings
b
Connector
d
Small burner jet
e
Air sleeve
f
Air vent
24
All manuals and user guides at all-guides.com
g f
b c d
e
^ First loosen the fitting, c, using an
8 mm wrench. While doing so hold
the connector, b, with a 12 mm
wrench to prevent the tubing from
twisting.
^ Then remove the connector, b, from
the fitting, a, using two 12 mm
wrenches.
^ Remove the jet, d, and replace it
with the new jet.
^ Slide the air sleeve, e, until there is a
1
/
" (2 mm) gap between the sleeve
16
and the air vent, f, as shown.
^ Reassemble the burners and test the
unit for leaks. The cooktop can be
operated without the cooktop surface
in place by igniting the flames with a
match.
Publicité
