Publicité
•
The router bit must extend below the flange of the
template guide, to cut the workpiece in the shape of the
template.
Using The Distance Piece (Fig. F)
(Distance Piece Not Incldued)
The distance piece can be used for trimming wooden or
laminate vertical projections.
Using The Centring Pin (Fig. G) (Centring Pin Not
Included)
The centring pin can be used to cut out circular patterns.
•
Drill a hole for the point of the centring pin in the centre
of the circle to be cut.
•
Place the router on the workpiece with the point of the
centring pin in the drilled hole.
•
Adjust the radius of the circle with the bars of the edge
guide.
•
The router can now be moved over the workpiece to cut
out the circle.
Using The Copy Follower (Fig. H) (Copy Follower Not
Included)
The copy follower helps to maintain an equal cutting
distance along the edge of irregularly shaped workpieces.
•
Place the router on the workpiece at the desired
distance from the edge to be copied.
•
Adjust the bars of the edge guide until the wheel is in
contact with the workpiece.
Switching On And Off
The centring pin can be used to cut out circular patterns.
Switching on
•
Keep the lock-off button (2) depressed and press the
on/off switch (1).
•
Release the lock-off button.
Switching off
•
Release the on/off switch.
Warning! Always operate the tool with both hands.
(Original instructions)
Hints For Optimum Use
•
When working on outside edges, move the tool
counterclockwise (FIG. M). When working on inside
edges, move the tool clockwise.
•
Use HSS router bits for softwood.
•
Use TCT router bits for hardwood.
•
You can use the tool without a guide (FIG. O). This is
useful for signwriting and creative work. Only make
shallow cuts.
•
Refer to the table below for common types of router bits.
Router Bits (Fig. P)
DESCRIPTION
Straight bit (1)
Trimming bit (2)
Rebating bit (3)
V-grooving bit (4)
Core box bit (5)
Cove bit (6)
Ogee moulding bit (7)
Rounding over bit (8)
Dovetail bit (9)
Chamfer bit (10)
Maintenance
Your tool has been designed to operate over a long period of
time with a minimum of maintenance. Continuous
satisfactory operation depends upon proper tool care and
regular cleaning.
Warning! Before performing any maintenance,
switch off and unplug the tool.
ENGLISH
APPLICATION
Grooves and rebates
Trimming laminates or
hardwood; accurate
profiling using a template
Rebates on straight or
curved workpieces
Grooves, engraving and
edge bevelling
Fluting, engraving and
decorative edge moulding
Decorative edge moulding
Decorative edge moulding
Rounding over edges
Dovetail joints
Chamfer edges
9
Publicité
