Publicité
Power Input & Output
100~240V 50/60hz AC INPUT
12V/1A DC OUTPUT 12W
6V/4AH Lead-acid rechargeable battery included
Power Consumption
Approx. 30mA
Approx. 65mA with backlight
Battery hours per charge
Approx. 130 hours (backlight off)
Low battery warnings
A battery symbol appears when battery voltage is lower than 5.6V. The battery
symbol will flash when battery voltage is lower than 5.5V. The scale will shut off
automatically when the battery voltage is lower than 5.4V.
Calibration
Spec and Weight Calibration
Press the T key and the number 1 key simultaneously in weighing mode to start
spec and weight calibration; the D1 position will then flash.
Note: If "CAL off" is displayed, the SW1 calibration switch has not been switched to
the ON position. The SW1 calibration switch is located inside the scale on the main
board. Toggle to the ON position to enable calibration functions.
Keypad descriptions:
M+ = ENTER key
Z = < (left arrow) key
T = > (right arrow) key
CE = ESC key
0 – 9 Numeric keys
Spec entry description:
t
0
0
0
0
2
D1
D2
D3
—
—
D1 & D2 = Division setup
D3 = Unit price and total price decimal point (cent) setup
5
Publicité
