Publicité
PLU (Price Look Up key) Pn = P01—P40
The PLU key is used to store a unit price into a Pn key. Simply enter a unit price,
press the PLU key, and "PLU" will be displayed for 3 seconds to allow the user to
select a Pn key to store the unit price into memory. After the unit price has been
stored, press the designated Pn key to recall the stored unit price.
P1/P2 (PLU Page Selection)
P1/P2
Press the
side of the display will indicate which PLU page the user is on.
P16
P11
P17
P12
P18
P13
P19
P14
P20
P15
Backlight function
To enable or disable the backlight, press the T key and the number 4 key
simultaneously. "UF1" and "b Lit" will appear on display. Press the number 1 key to
enable, or the number 0 key to disable the backlight. Press the M+ key to save any
changes.
Troubleshooting
Error messages
[Err H]
Initial zero too high (over FULL SCALE + 10%).
[Err L]
Initial zero too low (under FULL SCALE - 10%).
[Err N]
Unstable internal value.
[hhhhhh]
Overload (when the weight is heavier than the full capacity of the scale).
[- - - - - -]
Total price is over 999999
key to switch between PLU pages 1 and 2. A marker on the left
P06
P01
P07
P02
P08
P03
P09
P04
P10
P05
< P1
P2 >
4
P36
P31
P37
P32
P38
P33
P39
P34
P40
P35
P26
P21
P27
P22
P28
P23
P29
P24
P30
P25
Publicité
