Publicité
Using walker and rocker modes
13. Whilst pressing the buttons (A) at each end of the walker base, rotate the base
upwards 90 degrees and release the buttons. Check the base is locked and repeat the
process on the opposite side.
To convert the rocker back to a walker, simply reverse the steps 11 to 13.
Press in buttons (A), turn base back down, close the end blocks together and
reconnect.
WARNING! DO NOT convert from rocker to walker or vice-versa whilst your child is
seated in the walker.
Musical play tray
A
(continued)
14. Using a Phillips screwdriver, unscrew
the battery cover on the underside of the
musical play tray.
Insert 2 x 1.5V AA batteries (not supplied)
ensuring the correct battery orientation is
observed and then reattach the cover,
replacing the screw, making certain it is
not overtightened.
page 9
A
Publicité
