Publicité
The footpad
Attaching the flexi-toys
Using walker and rocker modes
LOCK
OPEN
11. Grip the sliding blocks at the front of
the walker on the walker base and move
them in opposite directions as shown.
OPEN
LOCK
9. The footpad must be fitted in the rocker
mode, and when you don't want your
child to move about in the walker mode.
Attach using the six clips on the footpad
and hook over the side bars on either side
of the base.
WARNING: Assembly by an adult.
10. Add three of the toy rings to one flexi-
toy and slot the flexi-toys into the holes
provided on either side of the main body
of the walker.
Note: The flexi-toys shown may vary from
those included with the product.
12. Separate the blocks and repeat the
procedure on the rear of the walker.
page 8
Publicité
