Saunaofen_EXTERN_neu_:Saunaofen Thermic Kompakt 8spr 24.06.10 12:34 Seite 13
400V~(L1;L2;L3)
von der Steuerung
Position the sauna stones on the stone grid
Sauna stones are a natural product. We recommend that you clean the sto-
nes with clean water before placing them on the stove. Do not use stones
unless they are designed for use in a sauna. Use a maximum of 12 kg of
stones.
Important. Position the stones loosely and remove any stones that
are too small. If the stones are packed too tightly they will affect the
air circulation and will result in the sauna stove and cabin walls
overheating and a fire risk.
Do not use the stove without stones.
Connection diagrams: 7,5kW Stove 400V
7,5 kW Ofen
(400V 3N~)
N U
V W
(L1) (L2) (L3)
7,5 kW Bio-Ofen
(400V 3N~)
N
U
V W
400V~(L1;L2;L3)
von der Steuerung
Only use stones that are marked as sauna stones in shops. Warranty
claims will not be accepted if stones other than those designed for use in
saunas are used or for claims resulting from filling of the stone chambers
incorrectly. Turn the stones at least once per year, remove any stones that
are too small and remove all stone dust and stone splinters. We recom-
mend that you replace the stones every two years.
Important. If you cover the stove and fill the stone container incor-
rectly the unit may cause a fire. Do not use the stove without sauna
stones.
GB
U1
hum
von der Feuchte-
steuerung
13