Publicité
Bluetooth
The EXM Pro10 is capable of streaming Bluetooth® audio from devices such as smart phones, tablets and lap-
tops� Pairing your device with an EXM Pro10 is simple and gives you the freedom to play your music wirelessly�
Bluetooth® Operation
When the EXM Pro10 cabinet is powered on, Bluetooth® will be dis-
abled by default� To enable it and connect to your device, simply tap
the Bluetooth® button located near Input 3's Combi-Jack� If a device
was previously connected to the EXM Pro10 cabinet, it will attempt to
reconnect automatically� Similarly, if a wireless stereo connection was
previously established, both EXM Pro10 cabinets used will attempt to
automatically re-establish the wireless stereo connection (in the same
Primary or Secondary role they previously performed)�
1. Pairing
To pair your device with an EXM Pro10 cabinet, simply press the Blue-
tooth® button down and hold for 4 seconds, then release the button�
2. Status
The blue status indicator lets you know the current status of the Bluetooth® connection as de-
scribed in this chart:
Mode
Standalone
Stereo Primary
Stereo Secondary
3. Level Control
The volume of Bluetooth® audio can be changed via the connected Bluetooth® device as well as the
Channel 3 Level control on the EXM Pro10 cabinet�
Note: For optimal audio quality, it is recommended to keep the Bluetooth® device volume control above
50% and use the channel 3 level control in the EXM Pro10 cabinet to achieve the desired output volume.
4. Stereo Mode
The EXM Pro10 supports wireless stereo playback between two EXM Pro10 cabinets for an enhanced lis-
tening experience� One cabinet will act as the primary unit, while the other as the secondary unit� The
primary unit will play the left audio channel of the streamed music and also maintain the Bluetooth®
connection with your device, while the secondary unit will play the right audio channel� Your device
only connects to the primary unit, not the secondary�
To enable stereo mode, simply double tap the Bluetooth® button on the EXM Pro10 cabinet that
should act as the Primary unit (left channel), then double tap the Bluetooth® button on the other
EXM Pro10 cabinet (right channel). The order matters, as the first unit double tapped will become the
primary unit (left channel)� Both EXM Pro10 cabinets will automatically attempt to re-establish the
Stereo Mode connection the next time they are powered on and enabled, with the same Primary and
Secondary roles previously used�
You can still pair new devices with an EXM Pro10 primary cabinet if it is in stereo mode� Pairing a
device to an EXM Pro10 cabinet that is in Secondary mode will end the stereo wireless connection�
5. Button Operation
• Single Tap – Enables Bluetooth®
• Double tap - Enter stereo mode
• Press and Hold (4 seconds) – Enter Pairing Mode
• Press and hold (8 seconds) - Disable Bluetooth®
6. Range
The EXM Bluetooth® operating range is rated for a 10m (33 feet) line of sight� The quality of the link
can be affected by an excess of traffic in the 2.4GHz bandwidth or structures between the Bluetooth®
unit and the streaming device�
Note: When connected to Bluetooth®, ALL audio is streamed from your device. If you do not want
your streaming music interrupted, turn off 'notifications' on your device.
3
®
Linked
Link-Back
Standby
ON
ON, blinks 1x every
Flashes 1x every 2
2 seconds.
seconds
N/A
ON, blinks 1x every
Flashes 2x every 2
2 seconds.
seconds
N/A
N/A
N/A
Pairing
Stereo Grouping
Flashes 2x per
N/A
second
Flashes 3x per
Double flash
second
N/A
Double flash
EXM
3
Aux In
Grouped
N/A
ON
Slow flash
Publicité
