Publicité
Please note once this unit is for hancing application, it required to use a safety rope (sold
separately, this safety rope can hold at least 10 times the weight of fixture) to ensure the
mounting safety of the fixture by attached through the holder.
Power:
Before plugging your unit in, be sure the ressource voltage in your area matches the unit re-
quired voltage. The unit is available in a 230V version only. Because the line voltage may vary
from venue to venue, you should be sure to plug the socket into a matching wall outlet before
attempting to operate your unit.
Fuses:
The «Funstrip DMX» is protected by F6.3A250V 5*20mm. Please see the printing on the case.
These fuses prevent you from overloading damaging your unit. To replace the protective fuse,
use a flat head screwdriver to unscrew the fuse holder. Pull out the old fuse and replace it
with a new one. Insert the fuse back into the slot and tighten. Always replace with exact same
type fuse removed unless otherwise specified by an authorized service technician.
5. Overview
Very hot lamp . Wait at least 15 minutes, before opening.
CAUTION!
Looser 4 screws for lamp replacement .
1
Very hot lamp . Wait at least 15 minutes, before opening.
CAUTION!
Looser 4 screws for lamp replacement .
7
1
DMX OUT
7
POWER THRU:
AC 230V~50/60Hz, MAX 20A.
DMX OUT
10
POWER THRU:
AC 230V~50/60Hz, MAX 20A.
10
1.Lamp
2. LED Display
3. Menu button
4. Up button
5. Down button
User Manual - FUNSTRIP 2R
Maximum surface temperature: 100 C
Minimum safety distance to flammable materials: 0.3 m
Maximum surface temperature: 100 C
Minimum safety distance to flammable materials: 0.3 m
10*Gu10 230V/50W
This multi-function display will detail all DMX Adress, Chase, Program,
Speed activity that pertains to the current operation mode of the unit.
This button will call up the unit operation mode between DMX and
Chase mode.
This button will increase the displayed value in the LED display.
This button will decrease the displayed value in the LED display.
2
11
Safety chain/cord
FUSE
attachment point
2
11
POWER
Safety chain/cord
FUSE
attachment point
3
4
5
6
12
POWER
3
4
5
6
12
V1.3 11/2021
8
POWER CONS : 800W
DMX IN
FUSE : F6.3A 250V 5x20mm
8
LAMP: GU10 75W-240V
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
NE PAS OUVRIR... RISQUE DE CHOC ELECTRIQUE
WARNING:
THIS PRODUCT MUST BE EARTHED
POWER INPUT:
AC 230V~50/60Hz, MAX 20A.
Made in P. R.C
POWER CONS : 800W
DMX IN
FUSE : F6.3A 250V 5x20mm
LAMP: GU10 75W-240V
CAUTION
RISK OF ELECTRIC SHOCK
9
DO NOT OPEN
NE PAS OUVRIR... RISQUE DE CHOC ELECTRIQUE
WARNING:
THIS PRODUCT MUST BE EARTHED
POWER INPUT:
AC 230V~50/60Hz, MAX 20A.
Made in P. R.C
9
6/22
Publicité
