Publicité
Bronze Luxury-Lift
Operating Instructions
To recline the chair:
The back and legrest move together using the LIFT and RECLINE buttons on the front of the hand wand.
1. With the chair in the seated position, press and hold the RECLINE button to recline the back
and raise the legrest. Release the button when you are in a comfortable position.
2. Make adjustments to the back and legrest recline as preferred.
3. To return the chair to the upright, seated position, press and hold down on the LIFT button.
Release the button when you reach the upright, seated position.
To stand up from the chair:
The LIFT button provides a coordinated movement of the lift function.
1. Firmly position your feet on the floor to maintain balance and prevent sliding or falling. Press
down on the LIFT button and hold to raise the chair to the standing position.
2. Release the button when the chair reaches a height that enables you to comfortably stand.
Carefully exit the chair.
3. Return the chair to the upright, seated position if you will be away from the chair for an
extended period. Press down on the RECLINE button to lower the chair. Release the button
when the chair is in its upright, seated position.
Additional Operating Features:
Safety Legrest
The legrest of the Bronze lift chair closes using spring pressure for safety. When the path of a closing
legrest is blocked by most ordinary obstructions, the obstacle in its path overcomes the spring pressure and
stops the legrest from closing.
If the legrest stops moving when returning to the closed position, carefully look for an obstruction and
remove it. Gently pull up on the legrest, remove the obstruction and gently release the legrest to allow it to
close. If you cannot easily remove the object, ask for help or contact your La-Z-Boy
Power Supply Over-Current Protection
The Bronze series lift chairs are equipped with over-current protection. This feature prevents damage to
the motors and electronics if there is an overload, short circuit or ground fault. Should the system detect an
over-current, the system shuts down and the recliner stops functioning.
If the over-current protection is activated, stop pressing the button in use. The system should reset
automatically. If you believe the chair is not being overloaded, or experiencing a short circuit or ground fault,
you may restart the function of the chair after the button has been released. Should the over-
current protection trip repeatedly, refer to the Troubleshooting section in this manual.
Additionally, the power supply includes a green LED status light to indicate power is being supplied to
the system. If the light is not illuminated, no power is being supplied to the system. Refer to the
Troubleshooting section in this manual if the power supply is plugged in, but the green light is not illuminated.
(Operating Instructions Continued)
12
Power Recliner
®
dealer.
®
Bronze Luxury-Lift
Operating Instructions
Coordinated Lift
& Return Button
When seated, press and
hold down on the LIFT
button to raise the chair
to the standing position.
– OR –
When reclined, press and
hold down on the LIFT
button to return the back
to the upright position
and the legrest to the closed
position.
Release the button to stop
in any reclined position, or
when fully upright.
DANGER
– To reduce the risk of burns, electric shock, serious
injury or death:
• Liquids exposed to electricity pose an immediate risk of electric shock. Do not use this
unit if the power control is damaged, wet, in contact with or near spilled water or any
liquid. Do not use the unit if the button activation switch has been exposed to water or
any liquid. Do not handle the plug or remote control with wet hands.
WARNING
– To reduce the risk of burns, fire, electric shock,
serious injury or death:
• Remove hand wand when not in use, and store out of reach of children.
Refer to the Hand Wand Removal Instructions for directions on how to remove the hand wand.
Power Recliner
®
F
ront
Coordinated Lower
& Recline Button
When lifted, press and hold
down on the RECLINE
button to lower the chair
to the seated position.
– OR –
When seated, press and
hold down the RECLINE
button to recline the back and
raise the legrest.
Release the button to stop
in any reclined position, or
when fully reclined.
13
Publicité
