Publicité
INSTRUCTIONS FOR USE
3.3 System Setup and Use:
3.4 Removal:
3.5 Device Maintenance
Make sure that all labels are installed and can be read. Replace labels as necessary by
using a plastic scraper to remove the label. Use an alcohol wipe to remove any adhe-
sive residue.
Contact Kyra Medical, Inc., if you need to repair or replace the device contact us using
the information from the contact details section.
3.6 Cleaning and Disinfection:
WARNING:
• After each use, clean the device as directed in this instruction for use.
• Do not submerge the device in liquid. Equipment damage can occur.
• Use caution in areas where liquid can get into the mechanism.
• Do not use bleach or products that contain bleach to clean the device. Injury or
equipment damage can occur.
• Make sure that the device is dry before you store it or use it again.
Wipes:
• Wipes may contain up to 2% sodium hypochlorite.
• Wipes may contain benzalkonium chloride (< or = 0.6% conc.) and didecyl dimethyl
ammonium chloride (up to 0.6% conc.)
©2025 Kyra Medical, Inc.
1
2
6
IFU 03-0189 REV L
Publicité
