Tone; Atp Passcode; Warranty - PERFECTPRO ROCKBOX 2 Manuel De L'utilisateur

TONE

The Tone function enables the user to adjust the lower and higher sound frequencies.
1. Press the On/Off button to turn on the radio.
2. Press and hold the Volume knob for about 3 seconds, the display shows "BASS 0".
3. Rotate the Volume knob to set the desire Bass level.
4. Press the Volume knob to confirm, the display shows "TREBLE 0".
5. Rotate the Volume knob to set the desire Treble level.
6. Press the Volume knob to confirm and return to normal display.

ATP PASSCODE

This radio is equipped with an Anti-Theft-Protection system (ATP system). When the
ATP system is enabled, a passcode is required for turning on the radio.
1. Press the On/Off button to turn on the radio.
2. Press the Menu button.
3. The display shows "System".
4. Rotate the Tuning knob until the display shows "Passcode". Press the Tuning
knob. "Enable" or "Disable" will be displayed, to enable ATP, turn and press Tuning
knob to select "Enable".
5. "Change Passcode" will be displayed, enter a 4-digits numeric passcode by
pressing the preset buttons (1-10)
6. "Confirm Passcode" will be displayed. Enter a second time the same passcode to
re-confirm.
7. To disable passcode, select "Disable" as previously showed. And re-enter the
previous passcode to disable the lock.
When ATP is enabled, and if wrong passcode is entered for three times, a timer will be
activated. The next attempt will be possible only after the timer has elapsed. The timer
period will be increased with further wrong passcodes.
WARNING: If you choose to activate the passcode, please note your passcode
somewhere safe as a memory back-up in case you should forget it. This as there
is no way to reset the radio should the passcode be forgotten!
19

WARRANTY

This radio has a 2 year limited warranty.
WARNING ! Warranty becomes void once the radio cabinet has been opened or
any modifications or alterations to the radio have been made !
The terms of the warranty of this radio do not cover the following:
- Damage caused by misuse, abuse, neglect, alterations, accidents or unauthorised
repair.
- Normal wear and tear.
- Breaking or bending of the metal telescopic antenna.
GB
20