WeatherTech BatteryCharger 022-0200 Mode D'emploi page 8

Pour batteries de demarrage/a decharge poussee
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

1)
If the charger does not turn on and none of the LED's illuminate.
a.
2)
The green (fully charged) LED (5) comes on immediately when charging a
discharged battery.
a.
3)
When charging a battery the green (fully charged) LED (5) never comes on.
a.
b.
4)
The amber LED continues to flash even with a connection to the battery:
a.
b.
5)
12V green LED (1) is flashing.
a.
6)
6V green LED (2) is flashing.
a.
7)
Amber & Green (fully charged) LED (5) are toggling.
a.
b.
8
TROUBLESHOOTING
Check to make sure the AC outlet is supplying power by plugging in
a lamp, an appliance, or a voltage meter.
The battery is probably defective, take the battery to the dealer to be tested.
The battery may be defective, take the battery to the dealer to be tested.
The battery has an excessive current draw, remove or disconnect the
battery from the equipment.
Check the fuse in the accessory cable.
The battery voltage is too low.
The battery is damaged or the incorrect battery voltage has been selected.
The battery is damaged or the incorrect battery voltage has been selected.
Reverse polarity connection to the battery.
The chargers safety timer has activated due the battery not reaching
its optimal voltage. The battery may be defective, take the battery to the
dealer to be tested.
P/N 392-0354-R0

Publicité

Table des Matières
loading

Produits Connexes pour WeatherTech BatteryCharger 022-0200

Ce manuel est également adapté pour:

Batterycharger 022-0209

Table des Matières