Publicité
Translation of the original instructions
Caution
This face shield does not provide unlimited face protection. For your own protection, read this instruction completely before using this
face protection.
Storage
When not in use, it is recommended to store the face shield in a clean and dry poly bag or case for visor protection.
Direction for use
This face shield has been design ed for your personalsafety. It must be worn for the who le du ration of exposure to hazards. Leave
the work area if dizziness for irritation occurs, or if the face shield become damaged.
Cleaning and maintenance
To maintain your face shield in good condition:
l.do not use abrasive materials, clean and rinse in warm soapy water and dry with a soft cloth.
2.any part of the face protector that is in contact with the wear er shall be disinfected by alcohol.
Field of use
This face shield is design ed to protection the user against eve and face injuries through mechanical impact or splashes liquids.
Modèle : D1009
Marking
Frame : YJP EN 166 3 B CE
Marking
Screen : YJP 1 B CE
Package
You could put this protector in a plastic bag for the pur pose of transport it.
Method of fitting and replacement of screen
Firsttear off the thin film on the outer part of the screen in front of your face and place the headband on forehead. Adjustthe length
knob on back of head hoop to fit your head. To change a new screen, no tool is needed. Just unlock the small button on the frame
and hold the screen to take out the worn screen, then place a new one and lock the small button on the frame again.
Du ration of use
Inspect for damage regularly. when the face protector has become brittle, the face shield should be replaced.
Warning
- this product is for face protection against mo derate impact hazards but not unbreakable.
- do not modify or alter the face protector.
- pitted or scratch ed screen redu ce vision and seriously redu ce protection and should be replaced immediately.
- this face protection has not any filtering action. It does not protect against molten metal splashes, hot solids, electrical hazards, gas,
coarse and fine dust particles and particles thrown at high speed at extreme temperatures.
- always check with supervisory personnel to ensure vou are seing given the proper protection relative to working conditions-consult
the relevant european standards.
- the material that may come into contact with the wearer's skin could cause allergic reactions to susceptible individuals.
Warranty
The warranty covers faulty workmanship for 2 years from the date of purchase (parts and labour).
The warranty does not cover:
• Transit damage.
• Normal wear of parts (eg. : cables, clamps, etc..).
• Damages due to misuse (power supply error, dropping of equipment, disassembling).
• Environment related failures (pollution, rust, dust).
In case of failure, return the unit to your distributor together with:
- The proof of purchase (receipt etc ...)
- A description of the fault reported
PROTECTION SCREEN FOR GRINDING
Explanation of marking
YJP: Manufacturer identification
EN 166 : European standard number
3: Area of use (Liquids (droplets or splashes))
B: Impact resistance (120m/s)
CE: European Conformity
Explanation of marking
YJP : Manufacturer identification
1: Optical class
B: Impact resistance (120m/s)
CE: European Conformity
3
EN
Publicité
