Publicité
to set the duration (clockwise to increase the duration, counterclockwise to
decrease the duration), so that the appliance turns on automatically once
the selected time is reached. 12 possible settings, from 1h to 12h.
To deactivate the timer, set the time to 0 or manually turn the fan off/on.
Horizontal oscillation (left/right)
To activate horizontal oscillation, press the corresponding button. 4
possible settings, 30°, 90°, 180° or 360°. The display panel indicates the
selected rotation angle. To deactivate oscillation, press the button again
until no angle indicator is displayed.
Note : If the appliance cannot find its original (central) position, the function
stops and the display panel indicates the error code "EE". If needed, turn
the appliance off and then on again, and manually return the fan head to
the central position if necessary.
Vertical oscillation (up/down)
To activate vertical oscillation, press the corresponding button. To
deactivate oscillation, press the button again. The display panel shows the
corresponding indicator when the function is activated.
Wind modes
By default the device starts in normal mode. Press the corresponding
button to change the ventilation type : normal, natural, night.
Normal mode : the fan operates normally according to the selected speed.
Natural mode : The device reproduces the effect of wind by operating
alternately at different speeds and intermittences.
In natural mode, the 32 speeds are divided into 3 groups :
- Speed between 1-10 : Natural wind at low speed : Display "10".
- Speed between 11-20 : Natural wind at medium speed : Display "20".
- Speed between 21-32 : Natural wind at high speed : Display "32".
When activating this mode, by turning the rotary button you will have the
choice between 3 settings, "10", "20" or "32". Depending on the setting
chosen, the operation is as follows :
- Natural wind at low speed :
19
Publicité
