Publicité
Your device is fully assembled and ready to use. Plug in the power cord,
the device will then beep 2 times. Using the control panel or remote control
(requires 1 x 3V CR 2032 battery, see REPLACING THE BATTERY
section for more information) :
Power ON/OFF
Press the corresponding button to turn the fan on or off. The unit starts by
default at speed 10.
The indicator lights
are displayed on the display panel as well as
"10".
Note: If the horizontal oscillation function (left/right) is activated when you
turn off the fan, the unit automatically returns to its original (central)
position.
Speed setting
Turn the rotary knob to adjust the speed (32 speeds). The display panel will
show the selected speed. Turn clockwise to increase the speed or
counterclockwise to decrease the speed.
1 = low speed
...
32 = high speed
Note : Beeps will sound if you continue to turn the rotary knob after
reaching the minimum or maximum speed settings.
Timer
When the appliance is in operation, you can set the timer by pressing the
corresponding button and then turning the rotary knob to set the duration
(clockwise to increase the duration, anti-clockwise to decrease the
duration), so that the appliance switches off automatically once the
selected time is reached. 12 possible settings, from 1h to 12h. To validate
the setting, do not touch the rotary knob for about 5 seconds or press any
other button. The selected time and the letter "h" are displayed on the
display panel, meaning that the timer is active, then the fan switches off
automatically once the time is reached. When the timer is active, the
display panel alternates every 10 seconds between timer and speed
information.
When the appliance is not in operation (in standby state), you can set the
timer by pressing the corresponding button and then turning the rotary knob
18
Publicité
