X4-TECH Bobby Joey Mode D'emploi page 26

26
The device must not be connected to more than one
power supply.
wrong usage of the transformator may lead to electric
shock. The transformator used for this toy has to be
checked for damages to the housing, connector, cable
and other parts. If there is any damage, the transforma-
tor must not be used.
If there is any doubt in the safety of this device (e.g.
because of damage to the enclosure, cables, an optional
power adapter or the internal transformer), the device
should not be used until the damage has been properly
removed.
This device may only be connected to a 6 V / 300 mA
AC/DC adaptor with negative pole at the inner
conductor of the plug. The usage of other kinds of
power adaptors may damage the device.
Make sure the power supply plugs polarity corresponds
with the input jacks on the device.