Publicité
4. Slide the AP onto the mounting bracket in the reverse direction against the arrow on the bracket
until it clicks into place.
NOTE:
1. The AP supports wall mounting and ceiling mounting and the installation steps
are similar. Here the ceiling mounting is taken as an example.
2. Install the Ethernet cable before mounting the AP onto the bracket.
3. Do not forcibly push the AP into the slots.
4. After installation, verify that the AP is securely fastened.
Installing the Optical Module
Insert the SFP module into the AP and then insert the fiber optic cable into the module.
6
P
S F
5 G
5G SFP
Console
LAN 2/IoT
LAN 1/5G/PoE
Reset
K
54V
Publicité
