Publicité
System Mode
Current Mode: Fit AP Mode
AC
AP
NOTE: The device restarts after mode switch. please wait for a minute.
NOTE:
The AP works in Fit AP Mode by default.
Configuring the AP via the Console Port (FAT AP Mode)
Step 1: Connect a computer to the AP's console port via the console cable.
Step 2: Start the terminal simulation software such as HyperTerminal on the computer.
Step 3: Set the parameters of the HyperTerminal: Baud rate to 9600, Data bits to 8, Parity to None and
Stop bits to 1.
Quick Connect
Protocol:
The port may be manually entered or selected from the list.
Port:
Baud rate:
Data bits:
Parity:
Stop bits:
Name of pipe:
Step 4: Click Connect to enter. And enter the default password, admin.
10
Internet
ROUTER
POE SW
AP
CLIENT
AP
Fit AP Mode
Serial
COM3
9600
8
None
1
Show quick connect on startup
Internet
Internet
POE SW
AP
CLIENT
Fat AP Mode
Flow Control
DTR/DSR
RTS/CTS
XON/XOFF
Save session
Open in a tab
Connect
Connect
x
Airware
ROUTER
POE SW
CLIENT
Cloud Mode
x
Cancel
Publicité
