Publicité
Modello - Model - Modèle
Modell - Modelo
Fabbricante - Constructeur
Manufacturer - Hersteller
Fabricante
30. POWER-ON
After closing the door, plug the vending machine into the mains socket .
At this point the message appears on the touch display and auto-configuration is activated, which checks all the previous settings.
If a drawer is NOT inserted correctly, the display will signal the error by turning yellow (see image); once the drawer has been
correctly repositioned and the door closed, the display will auto configure and if there is no error the screen will be blank.
PRODUCTS SELECTION
•
The touch display lets you select the products visible inside the spirals.
•
The keys to be used for selection are numbered from 1 to 9. Enter your
required combination (10-75), corresponding to the choice of product to
dispense.
•
The credit inserted and available is displayed in the upper left box.
•
The numbers selected are displayed in the lower left box.
•
If the chosen selection is empty, the vending machine will notify you of the
failed selection and sale with an audible signal.
PROGRAMMING MENU
(SEE PROGRAMMING MANUAL)
•
This section describes how to set or modify the vending machine program-
ming parameters.
•
It is therefore advisable to read this section thoroughly, and only take action
after having understood the exact order of the required operations.
•
By following the procedures described in this chapter, it is possible to set
all the parameters concerning the vending machine configuration and the
product prices.
31. COIN COLLECTION
To collect coins, follow the points below:
1.
Open the commands column.
2.
Remove the money holding box.
3.
Having collected the coins, re-position the drawer
and close the commands column.
BROOKLYN PRO
EPTA S.p.A. - Sede legale
Via Mecenate, 86 - 20138 Milano – Italy
Capitale € 68.515.000 - R.E.A./MI – 1730229
Registro delle Imprese e Cod.Fiscale n. 04160730968
Partita IVA 04160730968
3 4 / 8 8
PAGE
UM000761
N° DOC
Publicité
