Publicité
STEP 9
1. Attach drawer slide (F) to right side panel (2) by inserting 3 screws (E) through holes on
drawer slide (F), then tighten to right side panel (2).
STEP 10
J
1. Insert 8 wood dowels (C) into wood dowel holes and insert 6 barrel nuts (M) into barrel nut
holes on upper back rail (4) and support rails (5).
2. Attach upper back rail (4) and support rails (5) to middle side panel (3) by inserting wood
dowels (C) into wood dowel holes on middle side panel (3).
3. Insert 3 machine screws (J) through holes on middle side panel (3), then rotate clockwise to
tighten to upper back rail (4) and support rails (5) with allen wrench (L).
4. Attach right side panel (2) to upper back rail (4) and support rails (5) by inserting wood
dowels (C) into wood dowel holes on right side panel (2).
5. Insert 3 machine screws (K) through holes on right side panel (2), then rotate clockwise to
tighten to upper back rail (4) and support rails (5) with allen wrench (L).
M C
M
5
C
M
C
C
J
M
C
3
J
F
2
E
E
L
K
M C
C
4
M
5
F
E
K
2
K
L
J&K
Publicité
