Publicité
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ ALL INSTRUCTIONS BEFORE USE • FOR HOUSEHOLD USE ONLY
13
DO NOT operate any appliance with a damaged cord or plug, or after the appliance malfunctions or is
dropped or damaged in any manner. This appliance has no user-serviceable parts. If damaged, contact
SharkNinja for servicing.
14
Extension cords should NOT be used with this appliance.
15
DO NOT allow children to operate this appliance or use as a toy. Close supervision is necessary
when any appliance is used near children.
16
This appliance is NOT intended to be used by people with reduced physical, sensory, or mental capabilities,
or lack of experience and knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
17
Before each use, inspect blade assembly for damage. If a blade is bent or damage is suspected,
contact SharkNinja to arrange for replacement.
18
DO NOT attempt to sharpen blades.
19
DO NOT allow the unit or the cord to hang over the edges of tables or counters. The cord may
become snagged and pull the appliance off the work surface.
20 DO NOT allow any part of the unit to contact hot surfaces, including stoves and other heating
appliances.
21
ALWAYS use the appliance on a dry and level surface.
22 NEVER place a blade assembly on the power pod without it first being attached to the cup.
23 Keep hands, hair, and clothing out of the container when loading and operating
24 ONLY use attachments and accessories that are provided with the product or are recommended by
SharkNinja. The use of attachments including canning jars not recommended or sold by SharkNinja
may cause fire, electric shock, or injury.
25 During operation and handling of the appliance, avoid contact with moving parts.
26 DO NOT operate the appliance with an empty container.
27 DO NOT fill containers past the MAX FILL or MAX LIQUID lines.
28 DO NOT microwave any containers or accessories provided with the appliance.
29 DO NOT perform grinding operations.
30 Before operation, ensure all utensils are removed from containers. Failure to remove utensils can
cause containers to shatter and potentially result in personal injury and property damage.
31
NEVER operate the appliance without lids and caps in place. DO NOT attempt to defeat the
interlock mechanism. Ensure the container and lid are properly installed before operation.
32 DO NOT expose the containers and accessories to extreme temperature changes. They may
experience damage.
33 NEVER leave the appliance unattended while in use.
34 DO NOT blend hot liquids. Doing so may result in pressure buildup and steam exposure that can
pose a risk of the user being burned.
35 If you find unmixed ingredients sticking to the sides of the cup, stop the appliance, remove the blade
assembly, and use a scraper to dislodge ingredients.
36 DO NOT attempt to remove the container and lids from the power pod while the blade assembly is
still spinning. Allow the appliance to come to a complete stop before removing lid and container.
37 Remove the Pro Extractor Blades™ Assembly from the Ninja® Cup upon completion of blending.
DO NOT store ingredients before or after blending them in the cup with the blade assembly
attached. Some foods may contain active ingredients or release gases that will expand if left in a
sealed container, resulting in excessive pressure buildup that can pose a risk of injury. For ingredient
storage in the cup, use only Spout Lid to cover.
38 If the appliance overheats, a thermal switch will activate and temporarily disable the motor. To
reset, unplug the appliance and allow it to cool for approximately 15 minutes before using again.
39 The maximum wattage rating for this appliance is based on the configuration of the Pro Extractor Blades
Assembly and Ninja Cup. Other configurations may draw less power or current.
40 DO NOT process dry ingredients without adding liquid to the cup. It is not intended for dry blending.
41
To protect against risk of electrical shock, DO NOT immerse the power pod in water or other liquid.
Unplug the power pod before cleaning.
SAVE THESE INSTRUCTIONS
ninjakitchen.ca
PARTS
A Power Pod
B Ninja® Cup
C Pro Extractor Blades™ Assembly
D Spout Lids
E Storage Lid
NOTE: Number and size of cups and type
of lids available vary by model.
BEFORE FIRST USE
IMPORTANT: Review all warnings at the beginning of this Owner's Guide before proceeding.
WARNING:
Handle the Pro Extractor Blades Assembly with care, as the blades are sharp.
WARNING:
Remove utensils prior to processing. Failure to remove may cause the Ninja Cup
to be damaged or to shatter, which may cause personal injury.
WARNING:
Do not blend hot, effervescent, or carbonated liquids. Doing so may cause
excessive pressure buildup, resulting in risk of laceration and or the user being burned.
WARNING:
Remove the Pro Extractor Blades Assembly from the Ninja cup upon completion
of blending. Do not store ingredients before or after blending them in the cup with the blade
assembly attached. Some foods may contain active ingredients or release gases that will expand if
left in a sealed container, resulting in excessive pressure buildup that can pose a risk of injury.
DID YOU KNOW?
• You can take your drinks on the go using the Spout Lids or Storage Lid.
• The containers, lids, and blade assembly are BPA free and dishwasher safe.
NOTE: Handle the Pro Extractor Blades Assembly by grasping around the perimeter of the blade
assembly base.
NOTE: All attachments are dishwasher safe. Ensure blade assembly and lids are removed from their
containers before placing in the dishwasher. Exercise care when handling blade assembly.
1 Remove all packaging materials from the appliance. Exercise care when unpacking blade assembly, as
the blades are sharp.
2 Wash containers, lids, and blade assembly in warm, soapy, water using a dishwashing utensil with a
handle to avoid direct contact with the blades. Exercise care when handling blade assembly, as the
blades are sharp.
3 Thoroughly rinse and air-dry all parts.
A
C
D
B
E
ninjakitchen.ca
Publicité
