Publicité
Effects Section
MASTER MUTE LED
18
When the LED is ON it indicates the master
mute is activated.
MASTER MUTE
19
Depressing this button mutes channels one
through five, preventing signal from passing
to the power amplifier. This button does not
affect channel 6.
®
KOSMOS
-C
20
The Kosmos -C module uses special circuitry
21
to enrich the sound of your system. The
LOW control is not just a simple bass boost.
It provides 'natural bass enhancement' by
adding harmonically related bass signals that
track envelope of the original signal. The
Kosmos-C HIGH control can be used to add
clarity to dull signals.
EFFECTS TYPE TABLE
22
This table lists the types of effects available and
the abbreviation used for each effect in the first
character of the LED display. The chart also lists
the parameter associated with each effect, which
is controlled by turning encoder 24. A more
detailed list of effects can be found at the end of
this manual.
EFX LED
23
This LED indicates the type of effect currently
selected. When turning encoder 27 the display
will flash until the encoder is depressed,
selecting a new effect.
PARAMETER CONTROL
24
This encoder controls the parameter associated
with the selected effect, listed both on the
mixer (22) and in this manual. The parameter
control is used to make adjustments to the
sound of the effect.
EFX MUTE
25
When pushed this button bypasses the effects section, letting the user listen to the dry signal. When
depressed and muted, LED 23 displays two dashes "--".
CLIP LED
26
This LED blinks RED when the signal to the effects section is too hot and is causing distortion. Find the
source of the hot signal by reducing the EFX SEND (4) on each channel until the LED is no longer clipping
(blinking red).
EFFECTS SELECT
27
Turn and push this encoder to select the desired effect.
18
19
23
24
20
21
25
26
27
22
Publicité
