Publicité
2. Connect the wire whisk to the motor unit and slide the two pieces
together with a clockwise motion until you hear a click.
3. Press the button
speed TURBO after about 30 seconds to avoid splashing.
4. After use, disconnect the appliance from the power supply and detach the whisk from the motor
body with a counter-clockwise motion. Clean as described in the section, "CLEANING AND
MAINTENANCE".
Notes and tips:
• The liquids or ingredients must not be higher than the mixer shaft.
• Leave hot foods to cool to avoid the risk of burns.
• Do not scrape the bottom of non-stick saucepans with the whisk, as the stainless steel may
scratch or leave marks on the non-stick coatings.
• To avoid splashing, start slowly and use the whisk in deep containers.
• Move the whisk in a clockwise direction, keeping it slightly tilted.
•
Position the whisk in a container before turning on the appliance.
CLEANING AND MAINTENANCE
Before cleaning, always disconnect the blender from the power socket and leave it to completely
cool.
CLEANING
1. MOTOR BODY
Clean the motor body with a soft cloth or slightly dampened sponge and dry with a cloth.
HAZARD!
IMMERSE IN LIQUIDS!
2. FOOD BLENDER LID AND WHISK SUPPORT
Clean the food blender lid and whisk support with hot water and dishwashing detergent. DO
NOT WASH IN THE DISHWASHER!
3. SHAFT, BLADES, WHISK, GLASS AND CONTAINER
These can be washed in the dishwasher at a maximum temperature of 55°C, or with hot water
and dishwashing detergent. Hand washing is recommended so as not to alter the
characteristics of the materials.
(1) to activate the blender and switch to high
DO NOT WASH IN THE DISHWASHER OR
:
24
Publicité
