Publicité
PW 0620
1/2" IMPACT WRENCH 620Nm 20V BRUSHLESS
PW 0621
WORKPLACE SECURITY
1. Keep the area clean and well lit. Cluttered or dark areas can cause accidents.
2. Do not use power tools in explosive environments, e.g. in the presence of flammable liquids,
gases or dust. Power tools create sparks which may ignite the dust or fumes.
3. Keep children and people away during the use of the tool. Distractions can cause you to lose
control of the tool.
ELECTRICAL SAFETY
1. It is necessary that the power tool plugs are adapted to the base. Never modify the plug in any
way. Do not use adapters with earthed tools. Unmodified plugs and adapted bases reduce the risk
of electric shock.
2. Avoid contact with grounded objects such as pipes, radiators, stoves and refrigerators. There is
an increased risk of electric shock if your body is in contact with grounded surfaces.
3. Do not expose power tools to rain or wet conditions. The penetration of water into a tool
increases the risk of electric shock.
4. Do not misuse the cable. Do not use the cord for carrying, pulling or unplugging the tool. Keep
the cord away from heat, oil, edges or moving parts. Damaged or entangled cords increase the
risk of electric shock.
5. When operating a tool outside, use an extension cord suitable for outdoor use. Using a cable
suitable for outdoor use reduces the risk of electric shock.
6. If it is necessary to use the tool in a location with moisture, use a secure supply with residual
current device (RCD). The use of an RCD reduces the risk of electric shock.
PERSONAL SAFETY
1. Be aware of what you are doing and use common sense while using the tool. Do not use a tool
when you are tired or under the influence of drugs, alcohol or medication. A moment of distraction
while using a tool can cause serious personal injury.
2. Use safety equipment. Always wear eye protection. Safety equipment such as dust masks, non-
slip safety shoes, helmets or ear protection used in appropriate conditions will reduce the risk of
injury.
3. Avoid accidental starting. Make sure that the switch is in the off position before plugging in to
power or battery, collect or transport. Carrying tools with your finger on the trigger or plugging
the tool in with the trigger pulled can cause accidents and injury.
4. Remove any adjusting key before turning the tool on. A key left attached to a rotating part of
the tool may result in personal injury.
5. Do not rush. Maintain proper footing and balance at all times. This allows better control of the
tool in unexpected situations.
6. Dress appropriately. Do not wear loose clothing or jewelry. Keep hair, clothing and gloves away
from moving parts. Loose clothing, jewelry or long hair can get caught in moving parts.
7. If devices for connecting equipment for extraction and dust collection are supplied, make sure
they are connected and properly used. Use of dust collection can reduce risks due to dust.
USE AND MAINTENANCE OF THE TOOL
1. Do not force the tool. Use the right tool to the application being perfom,ed. A suitable tool will
do the job better and more safely if used for the purpose for which it has been built.
2. Do not use the tool if the switch does not allow to tum it on or off. Any tool that can not be
controlled by the switch is dangerous and must be repaired.
3. Disconnect the power source supply or battery block tool before changing accessories or before
storing the tool. These preventive safety measures reduce the risk of accidental starting of the tool.
Publicité
