Publicité
Such precautionary measures reduce the risk
of injury to persons.
LOADING
TOOL
●
Do not load the tool with fasteners
when any one of the operating controls
is activated.
●
Never place a hand or any part of body
in fastener discharge area of tool.
●
Never point the tool at anyone.
●
Do not pull the trigger or depress the
workpiece contact as accidental
actuation may occur, possibly causing
injury.
!
WARNING:
The warnings and precautions
discussed above cannot cover all
possible conditions and situations that
may occur. It must be understood by
the user that common sense and
caution are factors which cannot be
built into this product, but must be
supplied by the user.
UNPACKING
●
This tool has been shipped completely
assembled.
●
Carefully remove the tool and any
accessories from the box.
●
Inspect the tool carefully to make sure
no breakage or damage occurred during
shipping.
●
Do not discard the packing material until
you have carefully inspected and
satisfactorily operated the tool.
●
If any parts are damaged or missing,
please call 1-888-669-5672.
!
WARNING:
If any parts are missing do not operate
this tool until the missing parts are
replaced. Failure to do so could result
in possible serious personal injury.
!
WARNING:
Do not attempt to modify this tool or
create accessories not recommended
for use with this tool. Any such
alteration or modification is misuse
and could result in hazardous
condition leading to possible serious
personal injury.
06
HTTP://WWW.FREEMANTOOLS.COM
FEATURES
SPECIFICATIONS
AIR CONSUMPTION: 3.66 SCFM with 100
fasteners per minute @ 90 psi
AIR INLET: 1/4 inch NPT
MAGAZINE CAPACITY:
100 headless pins, 23 gauge
WEIGHT: 2.10 lbs
MAXIMUM PRESSURE: 100 psi
PRESSURE RANGE: 60 psi – 100 psi
FASTENER LENGTH RANGE: 1/2 inch to 1 inch
Compatible with all brands of 23 gauge
micro pins.
FEATURES
●
COMFORT-GRIP HANDLE
For increased comfort and control.
●
ANODIZED ALUMINUM CYLINDER AND
MAGAZINE
For long lasting durability.
●
ERGONOMICALLY ENGINEERED BODY
Rugged and Comfortable resulting in a
light-weight tool great for extended use.
OPERATION
USING BELT HOOK
The tool is packed with a separate hook
system. Assemble the hook on the tool before
using the hook. The hook can be positioned on
both left and right sides.
⒈
Loosen and remove the hook screw and nut
(A). Save the screw and nut for future use.
⒉
Position the hook in your preferred position.
Using the longer screw packed with hook,
fasten hook to tool.
1-888-669-5672
Hook nut (A)
Hook
LOADING FASTENERS
Connect the tool to the air source.
1.
2.
Set the pin length adjustment switch(B) to
the appropriate setting for the length of
pins you are loading by first pushing in on
the orange switch(B) and sliding until the
notch is in the appropriate groove.
Length adjustment switch(B)
3.
Push the latch button(C). Pull back on the
magazine cover fully(D).
Latch
button(C)
4.
Insert a stick of fasteners into the magazine
with pins positioned as shown, make sure
pins are not dirty or damaged. Pins are
marked for direction of loading.
HTTP://WWW.FREEMANTOOLS.COM
Magazine cover(D)
5.
Push the magazine cover forward until latch
engages.
!
WARNING:
The tool may fire when it is first
connected to the air source. Always
connect the tool to the air source
before loading fasteners to prevent
injury from unintended cycling. Always
make sure the tool's magazine is empty
at the beginning of each work session,
before connecting to an air source.
!
WARNING:
Keep the tool pointed away from
yourself and others when loading
fasteners. Failure to do so could result
in possible serious personal injury.
!
WARNING:
U s e o n l y t h o s e f a s t e n e r s
recommended for use with this tool.
Fasteners not identified for use with
this tool by the tool manufacturer are
able to result in a risk of injury to
persons or tool damage when used in
this tool.
!
WARNING:
Never load fasteners with the
workpiece contact or trigger activated.
Doing so could result in possible
serious personal injury.
1-888-669-5672
07
Publicité
