7. Care, Maintenance and Disposal
Battery Levels
When the battery level becomes low, the Status LED will flash and the device
will emit three short beeps. Replace both batteries as described in the "To Set
Up" section.
Cleaning and Storage
• Ensure the Heating Plate has cooled down before storing.
• Shut the device off and remove the batteries before cleaning.
• Clean the heating plate after each use with an alcohol-based pad / wipe.
Also clean the device between uses on multiple areas of the same person.
• Keep the device dry. Never place, store, or use this device near bathtubs,
showers, sinks, or other containers of water.
• Never use any substances for cleaning that could potentially be toxic if
contact the skin or mucous membranes.
• Do not use abrasive cleaning products or mechanical cleaning devices such
as brushes on this device.
• If not using the device for a long period of time, clean it and store it in a dry
20