Publicité
irritated skin. If the heat function feels too hot, stop treatment immediately.
1. Slide the Power / Light Switch to the "I" (On) position. The Status LED will
illuminate in blue, which indicates the device is ready to use.
2. To activate the Light, slide the Power / Light Switch another notch forward
toward the Light icon (
3. Place the Heating Plate of the device directly onto the area that has been
stung or bitten. Two application durations are available, depending on the
skin sensitivity of the person being treated:
- 3-second treatment: for the first use or for use on sensitive skin. Press
and release the Activation Button once. Half of the Ring Light will
illuminate and the treatment will start.
- 6-second treatment: for regular use on normal skin. Press and release
the Activation Button twice quickly. The Ring Light will illuminate fully
and the treatment will start.
To shut the device off at any time, press and hold the Activation Button for
about two seconds. In order to use the device again, slide the Power / Light
).
18
Publicité
