f) Bluetooth
mode
®
If this is the first time you are using your Bluetooth
After pairing, the soundbar will recognize your Bluetooth
Please note that it may take several seconds for the connection to be established. If no connection is established
within 2 minutes, the soundbar will switch to the previously connected audio source.
The transmission range is approximately 8 m in direct visibility. Objects placed between the Bluetooth
devices may reduce the transmission range.
Check the technical specifications of your Bluetooth
with all devices. Some wireless devices require you to enter a password when pairing. In this case, enter
"0000".
If the Bluetooth
automatically restored once the signal strength improves.
Proceed as follows to establish a Bluetooth
• Turn the soundbar on.
• Press the SOURCE button (6, 24) repeatedly to switch on Bluetooth
slowly. The soundbar is now in pairing mode.
• Activate Bluetooth
®
appears on the display of your mobile device with the name "renkforce TB240WW".
If the soundbar's Bluetooth
button. The soundbar emits the audible message "Pairing" (establishing a connection) and the Bluetooth
indicator flashes quickly.
• Select "renkforce TB240WW" to pair the devices. The soundbar emits the audible message "Paired" (connection
established) in confirmation and the Bluetooth
• You can now start playback on your mobile device.
Disconnect the Bluetooth
• Switch the soundbar to a different audio source (e.g. AUX).
• Deactivate Bluetooth
lost) in confirmation.
• Press the BT PAIR (27) button. The soundbar emits the audible message "Pairing".
Music playback from your Bluetooth
• The soundbar supports the following profiles in Bluetooth
- A2DP (Advanced Audio Distribution Profile)
- AVRCP (Audio/Video Remote Control Profile) - Music control via the soundbar remote control and
• If your mobile device supports AVRCP, you can use the following buttons on the remote control for music control:
(26)
Button
(25)
Buttons
/
signal is weak, the connection to the soundbar may be lost. The connection will be
®
on your mobile device (e.g. smartphone) and scan for Bluetooth
name does not appear on your mobile device, press the BT PAIR (27)
®
connection one of the following ways:
®
on your mobile device. The soundbar emits the audible message "Disconnected" (connection
®
device
®
- Play, pause
- Previous/next track
-enabled device with the soundbar, both devices must be paired.
®
device automatically when Bluetooth
®
device before pairing. Compatibility is not guaranteed
®
connection:
®
indicator is lit solid.
®
mode:
®
- Audio playback
Audio playback
mode. The Bluetooth
®
devices. The soundbar
®
mode is activated.
®
®
indicator (2) flashes
®
®
39