Publicité
Problem
Cannot close door.
The dishwasher does not start.
The dishes are not clean.
28
Possible causes
The control panel requires calib-
ration.
The baskets are not correctly
positioned.
The door lock does not click in-
to place and lock.
has not been pressed.
The door is not properly closed.
You have opened the dishwash-
er to add more dishes while a
program is in progress.
The door lock has not clicked
into place and locked.
Check whether the Delayed
start option has been selected.
The plug is not plugged into the
wall socket.
A fuse/circuit breaker has been
tripped.
The spray arms do not rotate.
Spray arm holes or bearings
blocked.
Action
Turn off the water tap. Remove
the plug from the wall socket
and wait for 60 seconds. Then
plug the appliance back into the
wall socket and turn on the wa-
ter tap.
Check that the baskets are cor-
rectly positioned horizontally.
Check that the dishes are not
blocking the baskets from slid-
ing properly into place.
Check the door lock. If it does
not click into place and lock,
open the door.
Press and hold
Combi drying
until the display starts counting
down. Wait until the countdown
ends (60 seconds). Close the
door. Check that the door lock
clicks into place and locks.
Press
. The display starts
counting down.
Check.
Close the door and wait. After
a while, the dishwasher contin-
ues the program.
Check the door lock. If it does
not click into place and lock,
open the door.
Press and hold
Combi drying
until the display starts counting
down. Wait until the countdown
ends (60 seconds). Close the
door. Check that the door lock
clicks into place and locks.
Press and hold
for three
seconds if you want to cancel
the Delayed start option.
Check.
Check.
Check that the dishes are not
blocking the spray arms.
Clean the spray arms. See the
chapter Care and cleaning.
Publicité
