Publicité
Using the Pyrolitic cycle:
If a pyrolysis cycle is chosen the display shows "ECO", that lasts 90 minutes, blinking; by the "+" and "-" it
is possible to change in "SUPER" that lasts 120 minutes.
If a pyrolysis is already started it is no more possible to change from " ECO" to "SUPER" and vice versa.
It is not possible to modify a pyrolysis duration but ending time can be modified.
During pyrolysis the buzzer does not sound.
Pyrolysis is not available if separator or side grids or the meat probe are detected, and it is not
programmable via WiFi.
4.3 Hydro Easy Clean Function
The HYDRO EASY CLEAN procedure uses steam to help remove remaining fat and food particles from the
oven.
1. Pour 300 ml of water into the HYDRO EASY CLEAN container at the bottom of the oven.
2. Set the oven function to Static (
)or Bottom (
)heater
3. Set the temperature to the HYDRO EASY CLEAN icon
4. Allow the program to operate for 30 minutes.
5. After 30 minutes switch off the program and allow the oven to cool down.
6. When the appliance is cool, clean the inner surfaces of the oven with a cloth.
Warning: Make sure that the appliance is cool before you touch it.
Care must be taken with all hot surfaces as there is a risk of burns.
Use distilled or drinkable water.
EN 13
Publicité
