Publicité
2. Hold the pole tightly. Press the rotating button and turn
the cutting head to the desired position. Release the
rotating button and check to make sure that the cutting
head is locked in place (Fig. 18).
Fig. 18
Rotating button
Trimming Tips
The cordless pruner can be used to remove fresh blooms
from the garden; also great for pruning overgrowth, dead and
overlapping stems and twigs, as well as thin and weak growth.
Follow the tips below for operation.
1. Never cut too close to the bud, so the wound can heal
properly.
2. Always make the cut above 0.3 inch (8 mm) from the bud
(Fig. 19).
Fig. 19
3. The cut should slope away from the bud, so the rain can
run off (Fig. 20).
Fig. 20
Cutting head
0.3 inch (8 mm)
Bud
4. When removing the entire stem, cut back to the point
where it branched (Fig. 21).
Fig. 21
5. Cut branches one by one, as shown (Fig. 22).
Fig. 22
3
2
1
Maintenance
m
WARNING!
Always switch the product off and remove
the battery before performing inspection, maintenance, and
cleaning work.
1. If the cordless pruner requires cleaning, do not use
solvents to clean it. Only use a moistened soft cloth.
Never let any liquid get inside the tool; and never immerse
any part of the tool into any liquid.
2. Apply oil around the blade bolt and open and close the
blades about 10 times to work it in. Use the steel wool to
rub the oil over the cutting surfaces. Spray the tool with
alcohol and wipe with a paper towel.
3. Inspect the product before each use for worn and
damaged parts. Do not operate it if you find broken and
worn parts.
Blade Maintenance
To ensure years of efficient and trouble-free operation,
blade cleaning should be performed if sap and debris have
built-up, or if you live in an area where the soil is sandy.
Cleaning unusually heavy deposits may require removal of the
blade.
NOTE: Snow Joe
+ Sun Joe
®
any damage or injuries caused by repair of the pruner by an
unauthorized person or by mishandling of the pruner.
1. Keep the cutting blades clean and free of debris.
Remove trimmings.
13
will not be held responsible for
®
Publicité
