Publicité
Fig. 10
Operation
IMPORTANT! The product is intended for light-duty pruning of
shrubs and hedges for residential properties.
m
WARNING!
The blades continue to move to close and
open after releasing the switch. Turn OFF the tool and wait
until the blades come to a complete stop before adjusting or
cleaning.
m
CAUTION!
Wear protective gloves while working with
the pruner. Never touch the blade or blade rail while the tool is
in operation and be aware of the sharp edges even when the
pruner is not in use.
Starting + Stopping
1. With the unit securely assembled as hand-held pruner
mode or telescoping pole pruner mode, slide the battery
into the removable battery compartment until it clicks to
into position (Figs. 11 – 12).
Fig. 11
Connecting lock button
TELESCOPING
POLE PRUNER
MODE
Battery pack
Removable battery
compartment
Fig. 12
2. To use the unit as a hand-held pruner, grab the pruner
with the index finger resting on the trigger switch and the
4 other fingers gripping the handle and squeeze the safety
lock button. When you are ready to make a cut, use your
index finger to squeeze the trigger switch (Fig. 13). This
will close the blades to make a cut. Release the trigger
switch to open the blades. The pole pruner will return to
the (open) starting position.
Fig. 13
Trigger switch
Safety lock button
NOTE: The safety lock button reduces the risk of accidental
starting.
11
HAND-HELD
PRUNER MODE
Battery pack
Removable battery
compartment
HAND-HELD
PRUNER MODE
Publicité
