Controls
Figure C
Freezer Compartment Temperature Control
(-17.8°C)
to the preset recommended setting.
Refrigerator Compartment Temperature Control
Adjust refrigerator compartment temperature. The
refrigerator temperature is preset in the factory
at 37°F (2.8°C). Allow 24 hours for temperature to
Water Filter
Turbo Cool
To set the Turbo Cool™, press the Alarm pad for 3
seconds. The display will show tc.
Turbo Cool™ rapidly cools the refrigerator
compartment in order to more quickly cool foods.
Turbo Cool™ when adding a large amount of
the food to the refrigerator compartment, putting
away foods after they have been sitting out at room
can also be used if the refrigerator has been without
power for an extended period.
NOTE: The refrigerator temperature cannot
be changed during Turbo Cool™
temperature is not affected during Turbo Cool. When
opening the refrigerator door during Turbo Cool™,
the fans will continue to run if they have cycled on.
10
GYE18J, PYE18H, GFE24J, PFE24H, GFE26J
External Control (some models)
Alarm
Press the Alarm pad to toggle the door alarm
between off and on. The alarm will sound if either
0°F
door is left open for more than 2 minutes. The
beeping stops when you close the door.
Lock
Press and hold the Lock pad for 3 seconds to lock
out ice and water dispenser and all other controls.
Press and hold to unlock the controls.
LED dispenser Light
Press the Light pad to turn your dispenser light on
and off.
NOTE: To put the refrigerator control in the OFF
position, simultaneously touch the words Freezer and
Fridge for 3 seconds.
be disconnected by any setting on the control panel.
Changing °F to °C or °C to °F: Press and hold the
NOTE: The refrigerator is shipped with protective
film covering the temperature controls.
remove it now.
Power to the refrigerator cannot
49-1000472 Rev. 3