Publicité
PARTS
1.
Lid dust bag compartment
2.
Connection for hose
3.
Handle lid dust bag compartment
4.
Handle
5.
Button for cord roll-up system
6.
On/off button
7.
Buttons to set the suction power
8.
Flexible hose
9.
Handle for hose with valve
10. Connector for the hose
11.
Telescopic tube
12. Sliding button for tube length
13.
Floor nozzle
14. Hard floor brush
15.
Crevice vacuum cleaner
16. Duster
17.
Furniture nozzle
ASSEMBLY
Always unplug the appliance from the socket before removing or connecting parts. Make sure that the
dust bag is always in the correct position.
FLEXIBLE HOSE
·
Assembly: Push the coupling of the flexible hose into the connector hole until you hear it click.
·
Disassembly: to unlock, press the unlock buttons on the sides of the connector.
TELESCOPIC TUBE
1.
Put the handle of the hose into the telescopic tube.
2.
Set the telescopic tube to the desired length. To do this, push the slide button forward and pull out
the bottom part of the tube to make it longer. Release the slide button and let the tube snap into
place.
3.
Attach the floor nozzle to the telescopic tube by firmly sliding the tube into the nozzle.
ACCESSORIES
1.
Crevice nozzle: for hard to reach areas like radiators, crevices, corners, in between pillows,...
2.
Dust brush: for furniture, shelves,...
3.
Furniture nozzle: for easy, quick and thorough cleaning of upholstered furniture
4.
Floor brush: for vacuuming hard flooring
20
DO1007S
1
2
3
4
9
8
10
14
15
12
13
11
16
17
5
6
7
Publicité
