Publicité
K
= 1,05 dB(A)
wA
Wear ear protection.
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined
according to EN 62841:
Typical weighted vibration
Right handle
Left handle
Uncertainty
FOR BRUSH CUTTER:
NOISE INFORMATION
A weighted sound pressure
L
=78,4 dB(A)
pA
K
= 3 dB(A)
pA
A weighted sound power
L
= 91,1 dB(A)
wA
K
= 0,61 dB(A)
wA
Wear ear protection.
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined
according to EN 60335:
Vibration emission value:
Right handle
Left handle
Uncertainty
WARNING: The vibration and noise emissions
during actual use of the power tool can differ
from the declared value depending on the ways
in which the tool is used especially what kind of
Type EJ082E EJ082E.X (082-designation of machinery, representative of Cordless Grass Trimmer/ Brush Cutter)
2006/42/EC, 2014/30/EU, 2011/65/EU & (EU) 2015/863, 2000/14/EC amended by 2005/88/EC & (EU)2024/1208
EN 62841-1, FprEN IEC 62841-4-4:2020+FprAA:2021-02, EN 62233 , EN ISO 3744, EN IEC 55014-1, EN IEC 55014-2,
a
= 1,99 m/s²
h,B
a
=2,46 m/s²
h,B
K = 1,5 m/s²
a
= 4,89 m/s²
h,B
a
=5,78 m/s²
h,B
K = 1.5 m/s²
DECLARATION OF CONFORMITY
DECLARATION OF CONFORMITY
Positec Germany GmbH
Postfach 680194, 50704 Cologne, Germany
On behalf of Positec declare that the product,
Description Cordless Grass Trimmer & Brush Cutter
Function cutting weeds, scrub, brush, and similar vegetation
Complies with the following directives,
For grass trimmer:
2000/14/EC amended by 2005/88/EC & (EU)2024/1208 :
- Conformity Assessment Procedure as per Annex VI
- Measured Sound Power Level 90,1 dB (A)
- Declared Guaranteed Sound Power Level 91 dB(A)
The notified body involved
Name: TÜV Rheinland LGA Products GmbH (notified body 0197)
Address: Tillystraße 2-90431 Nürnberg
Standards conform to
workpiece is processed dependant on the following
examples and other variations on how the tool is
used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well
maintained.
Using the correct accessory for the tool and
ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any
anti vibration accessories are used.
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration syndrome if its
use is not adequately managed.
WARNING: To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the operating
cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the
job. This may significantly reduce the exposure level
over the total working period.
Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades
Maintain this tool in accordance with these
instructions and keep well lubricated (where ap-
propriate).
If the tool is to be used regularly then invest in anti
vibration accessories.
Avoid using tools in temperatures of 10
Plan your work schedule to spread any high vibration
tool use across a number of days.
We,
C or less
0
EN
17
Publicité
