Publicité
Tap and Die Set | Inch Sizes | 1/4" - 1/2"
TOOLS
17 taps for internal threads (one each size):
#4 UNS 36
1/4" UNC 20
7/16" UNC 14
17 dies for external threads (one each size):
#4 UNS 36
1/4" UNC 20
7/16" UNC 14
1 adjustable tap wrench 1/16" - 1/2"
1 tap holder
1 die holder 25 x 9 mm
1 tool holder with sliding handle for taps | fits 1/8" - 1/4", reversible
1 automatic centre punch
5 screw extractors, heavy-duty, with square drive for tool holders, sizes 1, 2, 3, 4, 5
5 screw extractors, with square drive for tool holders, sizes 1, 2, 3, 4, 5
5 twist drills, HSS, roll forged, titanium nitrated, sizes 3/32"-1/8"-5/32"-3/16"-1/4"
1 screw pitch gauge, 12 blades, inch sizes SAE
1 screwdriver
ATTENTION
Please read and follow these instructions to reach a proper threading and longer tool-life. Taps and
dies are tools of high precision. They are produced from high-quality alloy steel, heat treated and
tempered for a hardness of 58-61 HRC. Check the hardness of your workpiece before starting thread-
cutting by a regular machinist's file. In case the workpiece can be easily filed, you may proceed with
your thread-cutting.
OCCUPATIONAL SAFETY
When using these tools,
always wear following protective equipment:
•
Safety glasses
•
Work gloves
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
#6 UNC 32
#8 UNC 32
1/4" UNF 28
5/16" UNC 18
7/16" UNF 20
1/2" UNC 13
#6 UNC 32
#8 UNC 32
1/4" UNF 28
5/16" UNC 18
7/16" UNF 20
1/2" UNC 13
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
#10 UNC 24
#10 UNF 32
5/16" UNF 24
3/8" UNC 16
1/2" UNF 20
1/8" NPT 27
#10 UNC 24
#10 UNF 32
5/16" UNF 24
3/8" UNC 16
1/2" UNF 20
1/8" NPT 27
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
BGS 70105
#12 UNC 24
3/8" UNF 24
#12 UNC 24
3/8" UNF 24
Publicité
